Sunday, August 12, 2012

Eleonora de Toldeo di Medici by Bronzino 1543

Eleonora de Toledo di Medici by Bronzio in 1543
I've been wanting to make this gown for a while and working up to it.  Last year I made a similar pearled partlet without a collar that I can use with this gown.  My bodice pattern works well, so the next step it to figure out how to make those sleeves.

After looking at the portrait, to me it looks like there are multiple panes on the sleeves and one of the panes is centered at the top of the shoulder.  So is it 4 or 5 panes?  At the right of the portrait, we see one of the panes which appears not to originate from the top of the shoulder but is the adjacent pane towards the front.  The panes attach to each other by pearled or beaded details.  I decided to mock up a 5-pane pattern.

I took a sleeve pattern from Patterns of Fashion p 114 that I had used previously and fits me well.
I drew a line lengthwise down the pattern and made lines parallel to the wrist at about 5cm intervals (about 2").  I measured the width of the sleeve at each of the intervals 0 to 55cm.  Then I made myself a spreadsheet:


from wrist/ cm
sleeve width/ cm
pane width/ cm
half pane/cm
pane/ inches
half pane / in
0
20.00
4.00
2.00
1.575
0.787
5
21.25
4.25
2.13
1.673
0.837
10
22.50
4.50
2.25
1.772
0.886
15
26.00
5.20
2.60
2.047
1.024
20
31.25
6.25
3.13
2.461
1.230
25
36.50
7.30
3.65
2.874
1.437
30
41.00
8.20
4.10
3.228
1.614
35
43.00
8.60
4.30
3.386
1.693
40
43.25
8.65
4.33
3.406
1.703
45
43.25
8.65
4.33
3.406
1.703
50
43.25
8.65
4.33
3.406
1.703
55
43.25
8.65
4.33
3.406
1.703

Next I took a clean sheet of paper, drew a long line, added the 5cm intervals, measured out one side the half pane width, folded it on the the long line and cut it out.  Then I made 4 more of the same.  Next step was adding the sleeve head curve to all of the strips.
I extended the sleeve head curve on my paper then placed the 5 pane strips next to each other with the bottom of each strip on a line for the wrist.  With 5 panes, there is a break between panes at the lowest point of the underarm and one of the panes is centered at the top of the shoulder.  Then I traced the sleeve head curve onto all pieces.
In period, they probably would have taken a sleeve pattern and just cut it into panes.  Since I want to center the couched motif down the center of the pane, I did not want curves in the pane pattern pieces.  I deliberately chose a pattern that is not likely to be period accurate, but will most likely achieve the look of the protrait.
The portrait shows a puff or turn back at the top of each pane where the sleeve meets the shoulder strap.  Others have lengthened the sleeves to create these puffs.  There is an example here:
http://katerina.purplefiles.net/garb/diaries/FLSOTTANA_Eleanor-Medici%20mid%2016thC.htm
On my mockup, I placed the pattern pieces on scrap fabric, cut the sleeve curve and part way down the sides then slid each pattern piece down 5" for the puff.

After cutting out, I marked 2.5" intervals up from the wrist and also 5" down from the shoulder.  When I was asking in a Facebook group for other costumer's opinions on the number of panes and the construction methods, one of the suggestions was when making a mockup, draw in your proposed trim.  I am planning to couch gold cord down in the pattern on the portrait on only three panes of each sleeve and leave the underarm panes plain.  Next step was to tack the panes together for a fitting.

Please admire the lovely red bar tacks at each 2.5" interval!  I folded back the 5" extensions at the top of each pane and it worked out OK with the center decorated pane because it is relatively flat at the top.  All the others were horrible because of the angles.
I'm totally giving up on the idea of making the puffs as an extension of the sleeve panes.  In addition, I am worried about the additional bulk of puffs in the armpit.  Although, I have to admit, I have been wearing the mockup while generating this post and it really hasn't bothered me.
My current puff idea which I have not mocked up is very unlikely to be the way it was done in period.  The weather here can be quite warm, so we frequently remove our sleeves - preventing heat stroke wins out over historical accuracy every day of the week!  I'm thinking of making the puffs separate from the sleeves so that they can be attached to the shoulder straps with or without the sleeves.  I'll measure along the sleeve head curve and make puffs that width by 5" long.
Next step, is to figure out how to do the couching!


1 comment:

  1. What an incredible gown. Taking on a big, beautiful project there!

    ReplyDelete